Install the sensor
Place the wireless sensor in the required refrigerator or monitored area.
Clinics, hospitals and healthcare facilities
Automatic temperature monitoring for healthcare
Stop checking and writing down refrigerator temperatures manually. Logimic monitors temperature automatically, alerts responsible staff when configured limits are exceeded and keeps measurement history ready for operational checks and inspections.
No manual logging. Measurement history ready for inspections.
1,200+
temperature sensors in operation
Deployed in Czech healthcare
from one refrigerator
No manual logging
alerts and measurement history
Still writing refrigerator temperatures down every day?
Manual checks mean daily routine work — and no one is watching when the practice is closed.
Today — manual checks
- The nurse checks the refrigerator
- Reads the temperature
- Writes it in a paper log or spreadsheet
- Repeats the process the next day
- Records must be found and prepared before an inspection
With Logimic — automatic monitoring
- Temperature is measured automatically
- Readings are stored automatically
- Configured limits are evaluated continuously
- Responsible staff can be alerted when action is needed
- Measurement history is available when you need it
Spend less time on routine logging and more time on patients and healthcare operations.
Who watches the refrigerator when nobody is in the practice?
Logimic continues monitoring even outside working hours.
-
Friday 16:00
The practice closes.
-
Saturday 03:12
The refrigerator temperature begins to rise.
-
Saturday 03:20
The configured temperature limit is exceeded.
-
Saturday 03:20
The responsible person receives an alert.
Result: The team knows about the issue when it happens — not at the next manual check.
Manual logging records the past. Automatic monitoring watches what is happening now.
Inspection tomorrow? The records are already there.
Without automatic monitoring
- paper logbooks,
- spreadsheets,
- missing or incomplete records,
- manual preparation before inspections,
- searching for historical data.
With Logimic
- stored measurement history,
- clear records,
- export and reports where supported,
- easier preparation for inspections.
Instead of collecting records before an inspection, measurement history is already stored electronically and available when needed.
Simple to start
Measurements start automatically
Temperature data is collected and stored without staff intervention.
Alerts and history
Use the application for current status, measurement history and configured alerts.
Do we need a special refrigerator?
Not necessarily. In typical deployments the sensor can be added to the existing refrigerator without replacing the cooling unit. The exact installation depends on the fridge type.
From one refrigerator to an entire clinic
A small medical practice can start with one refrigerator. Larger clinics, pharmacies, departments or hospitals can monitor multiple refrigerators and rooms in one system.
1 fridge
Small practice
5 fridges
Clinic
20+ devices
Hospital / multiple departments
Deployed in practice
Already used in real healthcare environments
Medical practice
What is monitored: medicine refrigerator.
Benefit: no daily manual temperature logging and stored measurement history.
Practice reference →
Velká Bíteš Polyclinic
What is monitored: multiple pharmacy refrigerators.
Benefit: central overview, automatic records and easier access to measurement history for inspections.
Polyclinic story →1,200+ temperature sensors in operation — suitable for practices, clinics and larger healthcare deployments.
ACADA iTemp
Automatic healthcare temperature monitoring.
Powered by the Logimic platform. You get a sensor, the application and automatic supervision — without building the technology yourself.
What do I need to start?
A typical setup includes
- temperature sensor,
- connectivity / gateway where required by the deployment,
- access to the monitoring application,
- alert configuration,
- installation and onboarding.
How it works
- Tell us how many refrigerators or rooms you need to monitor.
- We propose the required setup.
- Sensors are installed and connected.
- Monitoring starts.
- Your team receives access to the system.
Monitoring for one medical refrigerator
- one temperature sensor,
- monitoring access,
- measurement history,
- alert configuration,
- basic setup.
Look once — and know everything is fine
Clear refrigerator status without a complex interface.
Frequently asked questions
Do we still have to log temperatures manually?
No. Sensors measure continuously and the system stores readings automatically. Manual logging no longer needs to be part of the nurse's daily routine.
Do we need a special refrigerator?
Not necessarily. In typical deployments the sensor can be added to the existing refrigerator without replacing the cooling unit. The exact installation depends on the fridge type and local conditions.
What happens when temperature goes out of range?
For supported measurements, limits and rules can be configured. When a deviation occurs, responsible staff can be alerted by email or SMS, depending on project configuration.
Is the solution suitable for a practice with one fridge?
Yes. Monitoring can start in a small practice with one refrigerator and expand as needed.
Can we monitor multiple refrigerators?
Yes. Deployment can start with one or several units and expand as requirements grow.
How do we access measurement history?
Recorded data and history are available electronically in the application for day-to-day operation and inspection preparation.
Does this help with regulatory inspections?
Measurement history and automated reports can serve as documentation for audits. Specific requirements depend on the facility type and project setup.
How do we get monitoring set up?
Tell us how many refrigerators or rooms you need to monitor. We will propose the required sensors and application access, install the equipment and configure alerts.
Stop writing temperatures down manually
Tell us how many refrigerators or monitored rooms you have. We will prepare a monitoring proposal for your practice or clinic.
Get a monitoring proposal See how it works